TDR-P
eco
Gas
EN
41 / 48
7.4
Three Monthly Cleaning
WARNING
Remove the power plug from the wall socket.
Clean the heat exchanger and the fan blades thoroughly as described below.
The parts can be accessed in the following way:
Heat exchanger
•
Remove the screws (A) from the ventilation grille (B).
•
Make the plate hinge on the back and take it from the pins (C) it is rotated on.
Fan blades
•
Remove the wing nuts (D) from the plate (E) that is found in the back of the ceiling in front
of the fan blades.
You can remove the fan blade by turning the nut on the fan clockwise (left-hand
thread). When remounting the fan ensure that the flat in the fan blade hole is
located over the fan axle.
•
Let removable parts soak overnight in water with a suitable cleaning agent added and clean
them with a brush.
•
Let the fan blades soak overnight in undiluted Fri-Jado Clean and clean them with a brush.
•
Remove the dirt from all inside parts of the TDR.
•
Wipe everything with a damp cloth to remove the residues of cleaning agent and put the
parts back again.
Summary of Contents for TDR 7 p Gas
Page 3: ...TDR P eco Gas EN 3 48 Empty page...
Page 45: ...TDR P eco Gas EN 45 48 Notes...
Page 46: ...TDR P eco Gas EN 46 48 Notes...
Page 47: ...TDR P eco Gas EN 47 48 Notes...
