TDR-P
eco
Gas
EN
40 / 48
Rotor and bottom plates
•
Remove the rotor and bottom plates from the unit (no tools required).
•
Place the detachable parts in a wide rinsing container filled with hot water and an
appropriate cleaning agent.
•
Soak these parts for one night and clean them the next day.
Fat collecting drawer
•
Carefully take out the fat collection drawer partly.
•
Open the tap until the drawer is empty.
•
Clean the drawer with cleaning agent or hot water combined with an appropriate cleaning
agent.
The interior
•
Clean the interior with cleaning agent or hot water combined with an appropriate cleaning
agent.
•
Dry the interior thoroughly by using a dry cloth. Make sure no water or detergent stays
behind in the unit.
Glass doors
•
Open the outer glass doors.
•
Unlock the inner glass doors (they are magnetically locked to the outer doors).
•
Clean the panes with cleaning agent or hot water combined with an appropriate cleaning
agent.
•
Dry the doors thoroughly by using a dry cloth.
•
If possible, leave the glass doors open at night.
7.3
Weekly Cleaning
WARNING
The control panel may only be cleaned using a damp cloth.
The exterior
•
Clean the exterior with cleaning agent or hot water combined with an appropriate cleaning
agent.
•
Dry the exterior thoroughly by using a dry cloth.
Gas hose
•
Check the gas hose for leaks by means of soap suds and immediately shut off the gas
supply if gas is escaping.
•
If the hose is damaged or has visible cracks immediately contact your supplier/service
station. Immediate replacement is required in view of possible danger.
Summary of Contents for TDR 7 p Gas
Page 3: ...TDR P eco Gas EN 3 48 Empty page...
Page 45: ...TDR P eco Gas EN 45 48 Notes...
Page 46: ...TDR P eco Gas EN 46 48 Notes...
Page 47: ...TDR P eco Gas EN 47 48 Notes...