Service Instructions
Page 78
Service Manual Deli Multisserie form 9123560 rev. 09/2017
SERVICE SET 9191292S, REVISION OF SOAP MISTER
Contents: parts b, g, m(3x), q, u and a sheet
metal tool.
Open the top of the unit and disconnect the 2
hoses from the soap mister.
The soap tube is marked with black tape.
Open the door and unscrew the mounting nut
(v). (32mm wrench).
Take out the soap mister.
The use of a vice is advised to make the job
easy, but it is not necessary. The description be-
low is with the use of a vice.
• Put the mounting nut back on the mister.
• Clamp the mister with the mounting nut (v)
in the vice.
• Unscrew the cap (a) while holding the body
(p) of the mister with a 28mm wrench (on
the 2 flat surfaces as hown).
Note that the cap is spring loaded.
• Remove the cap with o-ring (b) and the
spring (c).
• Pull out the plunger with the needle.
• Unscrew the o-ring cap (j).
Note that it will be spring loaded.
Note 2: Small collar bushes (n) might fall out.
Note 3: Sometimes an extra spacer is mounted
between j and k.
• Take out the spring (o).
• Take the metal collarbushes (n) out of the
o-ring cap (j) and also out of the soap mister
body (p).
• Take out the o-ring (m) from the o-ring cap.
• Take out 2 o-rings from the soap mister body
(p).
part n
2x
soap tube
a
b
c
d
e
f
g
h
i
j
k
n
o
p
q
r
s
t
u
m
v
