HOOD BC
EN
5
/
13
1.4. Safety instructions
WARNING
The outside of the unit can be very hot.
WARNING
Place no load on top of the unit.
WARNING
Risk of slippery floor: Spills may cause slippery surfaces, clean-up promptly.
The user of the unit will be fully responsible for abiding the locally prevailing safety- rules and
regulations.
The unit may be operated by qualified and authorised persons only. Anyone working on or with this
unit must be familiar with the contents of this manual and carefully follow all guidelines and
instructions. Never change the order of the steps to be performed. The management must instruct
the personnel on the basis of this manual and follow all instructions and regulations.
The pictograms, labels, instructions and warning signs attached to the unit, are part of the safety
measures. They may never be covered or removed, and have to be clearly visible during the entire
lifetime of the unit.
Immediately repair or replace damaged or illegible pictograms, warnings and instructions.
•
To avoid short-circuiting, never clean the unit using a water hose. For cleaning instructions,
see section 5.
•
During use, the unit can get very hot.
•
The unit must be cleaned regularly to ensure proper functioning.
•
This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
•
Children shall not play with the appliance.
•
Cleaning and user maintenance shall not be made by children without supervision.
1.5. Service and technical support
The electrical schematics of your unit is included. In case of malfunctions you can contact your
dealer/service agent. Make sure you have the following data available:
•
Model.
•
Serial number.
This data can be found on the identification plate.
1.6. Storage
If the unit will not be used temporarily, and will be stored, follow these instructions:
•
Clean the unit thoroughly.
•
Wrap the unit from getting dusty.
•
Store the unit in a dry, non-condensing environment.
