Bake Basic 3/5 - E & P
en / 2-9
9123573_
1007
1. Clean the inside, the removable parts and the accessories thoroughly with soapsuds before putting
the unit into use.
2. After cleaning, wipe the unit with a cloth moistened with clean water to remove soapsuds residues
and then dry the entire unit.
3. Place the beams for the baking trays.
4. Insert the plug into the socket.
3.3. Warm
through
Warm through the unit to remove the metal odour. The warming through takes place by heating the oven at
250 °C for 30 minutes. Before warming through, remove all materials from the oven except for the beams for
the baking trays and the baking trays and/or shelves.
Warm through the Bake Basic
Action
Operation
Display (after operation)
1
Switch on the oven
Last set baking time
2
Set the time to 30 minutes
/
_ 30
3
Select the temperature
Last set temperature
4
Set the temperature to 250 °C
/
_250
5
Start the preheating
The set baking time
6
After having finished the
preheating, the oven will give a
sound signal and
Load
appears
on the display
Start the heating-through process
The set baking time expires
7
After having finished the heating
through, the oven will give a sound
signal and
End
appears on the
display
Last set baking time
8
Switch off the oven
Follow the procedure below when storing a unit that will not be used for some time:
•
Thoroughly clean the unit.
•
Package the unit dustproof.
•
Store the unit in a dry place.
