MCC
–
Cold / Ambient
US
20/40
Checking the SET temperature
1. Press and release
SET
to access the “Machine status” menu.
2. Scroll through the folders with
and
until you find the folder
Pb1
,
Pb2
or
Pb3
.
3. Press
SET
to view the value measured by the corresponding probe.
Notes:
•
the displayed value cannot be changed.
•
folder
Pb2
can only be viewed on models that manage probe Pb2.
•
folder
Pb3
can only be viewed on models that manage probe Pb3.
Adjusting the SET Temperature
1. Press and release
SET
to access the “Machine status” menu.
2. Scroll through the folders with
and
until you find the folder
SET
.
3. Press
SET
to view the current setpoint value.
4. Change the setpoint value using
and
within 15 seconds.
5. To confirm the value press
SET
or
, or let a timeout occur (15 seconds).
Checking the product temperature
•
Once every hour, the product temperature should be checked using a digital thermometer.
Write down the measured values in a log.
•
Always use a disinfected thermometer sensor.
Switching off
•
Remove all products from the unit. In order to avoid temperature rise of the products, store
them in another cooling unit.
•
Switch the cooling off.
4.1.2 Control Panel
– Remote units
On/Off Switches
Lighting
Cooling
Switching-on the unit
•
Switch the cooling on.
•
Let the unit cool for approx. 30 minutes.
•
Switch the lighting on.
A7
A8
A7
A8
Summary of Contents for 24-2-A
Page 37: ...MCC Cold Ambient US 37 40 Notes...
Page 38: ...MCC Cold Ambient US 38 40 Notes...
