Fri-Jado 120-2-C FS, User Manual

Page: 10 / 40

MCC – Cold / Ambient
EU 10/40
2. DESCRIPTION OF THE UNIT
2.1 Technical description
The panels are made of galvanized steel plating, stainless steel or aluminium. Some of the visible
internal and external parts have been provided with a powder coating. The glass used is tempered
or layered. The unit can be moved by means of a pallet truck. The controls for operating the
appliance have been mounted on the operator side of the unit. The product contact parts are made
of stainless steel AISI 304 or AISI 430 and tempered glass.
Cold Units:
Cooling is achieved by means of a thermostatic temperature-controlled cold airflow. The cold air is
passed via the back and shelves over the products. Self-serve models have an additional set of
fans mounted in the top to create a stable air curtain on the open side of the cabinet to minimize the
infiltration of warm ambient air. The air on the front side passes through the suction grid in the
bottom of the unit. The MCC Cold unit is available in a 2, 3 and 4 level execution.
The temperature of the airflow is controlled electronically. The electronically-controlled thermostat
is factory programmed for the correct temperature. The set temperature can be changed from
-1
º C to +5 º C.
The units can be connected to a fixed drainage system or an optional evaporation tray to evacuate
condensation water. One LED-module per level provides for lighting of the products. Lighting will
automatically go on when switching on the cooling. Self-serve models can be fitted with an option
night curtain.
For the Self-serve models there are two user variants; a solid back version and a pass
through version which allows the user to (re)fill products via the back side.
Ambient Units:
The MCC Ambient unit is available in a 2, 3 and 4 level execution. One LED-module per level
provides for lighting of the products.
2.2 Intended use
Self-serve models (SS models) have been designed solely to keep packaged products cold and/or
to display them. Full serve models can be used for unpacked foodstuff as well. Any other use will
not be regarded as intended use.
The manufacturer accepts no liability whatsoever for loss or injury caused by failing to strictly adhere
to the safety guidelines and instructions in this manual or due to carelessness during installation,
use, maintenance and repair of the unit referred to in this manual and any of its accessories.
Use the unit in perfect technical condition only.
2.3 Accessories
Your unit contains the following standard accessories:
•
User manual,
•
Plinth set,
•
Front doors (when applicable).
For optional accessories see
www.frijado.com .