Fri-Jado BV TG110-M, User Manual

Page: 17 / 24

TG
EN 17 / 24
Rotor and bottom plates

Remove the rotor and bottom plates from the unit (no tools required).

Place the detachable parts in a wide rinsing container filled with hot water and an
appropriate cleaning agent.

Soak these parts for one night and clean them the next day.
Fat collecting drawer

Empty the drawer first, refer to section 4.6

Clean with „Fri-Jado Clean‟ or hot water with an appropriate cleaning agent.
The interior

Clean the interior with cleaning agent or hot water combined with an appropriate cleaning
agent.

Dry the interior thoroughly by using a dry cloth. Make sure no water or detergent stays
behind in the unit.
Glass doors:

Open the glass doors

Clean the panes with cleaning agent or hot water combined with an appropriate cleaning
agent.

Dry the doors thoroughly by using a dry cloth.

If possible, leave the glass doors open at night.
5.3. Weekly Cleaning
WARNING
The control panel may only be cleaned using a damp cloth .
Prior performing the weekly cleaning first execute the daily cleaning.
The exterior:

Clean the exterior with cleaning agent or hot water combined with an appropriate cleaning
agent.

Dry the exterior thoroughly by using a dry cloth.