Freund FE-TEL-48G Admin Manual Download Page 49

Page: 49 / 178

⚫

Volume options include Media, Alarm clock, Notification.

⚫

You can directly click a volume location to adjust the volume.

⚫

The volume settings, you can also press the keyboard volume

button “+ -” to increase or decrease the volume. Usually, volume

button is to adjust for ringtone or notification volume, but in

the broadcast media, pressing volume button is to adjust for media

volume.

4.5.2.

Interruptions

In the Sound & notification interface, click the Interruptions bar, enter the

interruptions setting interface. If users open the Silent mode, it will enter

the interruption interface to set priority event or priority time allow

interrupt.

Summary of Contents for FE-TEL-48G



















































































































































































Search results

Summary of Contents for FE-TEL-48G

Reviews:

Related manuals for FE-TEL-48G

Brands by name

Popular brands

Freund FE-TEL-48G, Admin Manual

Search results

Summary of Contents for FE-TEL-48G

Reviews:

Related manuals for FE-TEL-48G

Brands by name

Popular brands