Freund FE-TEL-48G Admin Manual Download Page 46

Page: 46 / 178

After all the parameters are configured, click "save" button to save the

configurations, then the sip account is added successfully. Then activate

the account.

4.4.2.

SIP Account ON/OFF

After SIP account is configured and registered successfully, it will display

the prompt “Registered” in the Account Manager, and the icon

will

be displayed on the status bar.

If you want to disable the registered account, tap the icon

change the account status, the icon

will be shown on the status

bar.

If the sip account is failed to register, the failure code will be displayed

under the account, and then you can check with the account

configuration or network connection. The icon

will be shown on the

status bar.

Summary of Contents for FE-TEL-48G



















































































































































































Search results

Summary of Contents for FE-TEL-48G

Reviews:

Related manuals for FE-TEL-48G

Brands by name

Popular brands

Freund FE-TEL-48G, Admin Manual

Search results

Summary of Contents for FE-TEL-48G

Reviews:

Related manuals for FE-TEL-48G

Brands by name

Popular brands