Netcomm V100
Configuration Instructions
Step 1: Connect your V100
1. Phone – plug in your analog telephone cord.
2. Ethernet Port - use an Ethernet cable to connect your V100 to your router or modem.
3. Power connection - Connect the power to your V100.
4. See your Netcomm V100 User Manual for more connection options.
Step 2: Install the V100 Software Utility.
1. If you have not already done so, install the V100 PC Tool utility on your PC. This would
have come on a CD with your V100, and can also be downloaded from the Netcomm
website:
http://www.netcomm.com.au/Support/downloads.php?Category=VoIP&Products=V100
2. Run the V100 PC Tools Application
