SILEXX SUSPENSIONSYSTEM
The SilexX lines are manufactured from white polyethylen (Dyneeema) with a colored
sheath.
The suspension system is constructed from individual lines that are looped and sewn
at both ends. A,B,C and D Lines are 1.5 mm diameter, middle Lines 1.2 mm and upper
Lines 1.0 mm
On the main brakeline the proper length is marked and it should not be changed to remain
within certification. The A Lines, Stabilo Lines and the A risers are red for easy identifica-
tion. The B Lines and all brake lines are yellow while all other lines are blue.
There are 4 Risers per side. The A lines are the most forward followed by the B Lines where
the Stabilo Line is also attached. The C lines follow and the rear Riser is the D lines.
A line plan can be found at the rear of this manual.
IMPORTANT SAFETY NOTICE
Maximum caution is advised. You are operating at your own risk!
It is your duty to check your equipment before every flight.
The Silexx may NOT be operated under the following conditions:
- outside of minimum or maximum load rating
- during rain, snow, turbulence or strong winf
- in clouds or fog
- In any aerobatic manner
- by an inexperienced pilot
Page 5
Chapter 1
Description and technical dates