manualshive.com logo in svg

Fresenius Medical Care multiFiltrate, Instructions For Use Manual

Share
Download
Fresenius Medical Care multiFiltrate Instructions For Use Manual Download Page 165

Chapter 4:  Operation

Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015

4-123

Interrupting the treatment

4.13.2 Connecting the patient / continuing the treatment

Stop circulation by pressing the 

[STOP]

 

key.

Press the [STOP] key for approx. 
3 seconds.

Disconnect the arterial patient line from 
the NaCl solution and connect it to the 
arterial vascular access.

Press the 

[START/RESET]

 key.

When the optical detector senses opaque 
fluid, disconnect the venous patient line from 
the NaCl solution and connect it to the venous 
vascular access.

Continue the treatment by pressing the 

[START/RESET]

 key.

Balancing starts automatically.
Ci-Ca pumps start automatically.

If necessary, set blood flow and heparin 
administration.

Summary of Contents for multiFiltrate



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands