manualshive.com logo in svg

Fresenius Medical Care multiFiltrate, Instructions For Use Manual

Share
Download
Fresenius Medical Care multiFiltrate Instructions For Use Manual Download Page 158

Chapter 4:  Operation

4-116

Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015

Treatment menu

4.11.9 Events

The last approx. 250 events are stored (depending on the data volume 
generated by the events logged). Their content is retained if the 
machine is switched off or if the mains power supply is interrupted.

Use the rotary selector to select 

Page

 or 

Line

 and press 

[OK]

 to confirm. 

This will activate the detailed view. The 
detailed view in the lower part of the screen 
displays the text messages for warnings 
(yellow) and alarms (red).

Use the rotary selector to scroll the events 
page by page or line by line.

Use the rotary selector to select 

Page

 and 

press 

[OK]

 to confirm.

Ten events per page will be displayed when 
you turn the rotary selector.

Summary of Contents for multiFiltrate



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands