manualshive.com logo in svg

Fresenius Medical Care multiFiltrate, Instructions For Use Manual

Share
Download
Fresenius Medical Care multiFiltrate Instructions For Use Manual Download Page 151

Chapter 4:  Operation

Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015

4-109

Treatment menu

4.11.5 Syringe change

In the case of a syringe change, the sum of all boli remains saved, 
regardless of whether the OD senses non-opaque or opaque fluid. The 
bolus data is only deleted when changing to the treatment mode.

Note

 

The syringe change menu can be accessed:
– Manually by selecting the Syringe change menu.
– Automatically after a syringe change notification.

Perform the syringe change according to 
the instructions.

Use the rotary selector to select 

Terminate syringe change? [OK] to 
confirm!

 from the menu field and press 

[OK]

.

Note on C

 

The syringe wings must be placed in the syringe wing slot.

Note on D

 

– The thumbplate of the syringe plunger must be positioned between 

the clamps of the grip handle.

Summary of Contents for multiFiltrate



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands