Fresenius Kabi Agilia SP, Technical Manual

Page: 42 / 306

42
6.2.3 Test 2: Maintenance
6.2.4 Test 3: Maintenance Messages
6.2.5 Test 4: Events
Test Description
Run this test to check that the pump maintenance data is correct.
1. Access the Tests menu. See section 6.2.1, page 40.
2. Press the arrow keys to select Test 2: Maintenance .
3. Press enter .
4. Press the arrow keys to scroll through the information screens
.
The following data is displayed:

Duration : Running time since last preventive maintenance in hours (if less
than 72 hours), in days (if less than 120 days) or in months

Date : Last preventive maintenance date

Total duration : Total running time in hours (if less than 72 hours), in days
(if less than 120 days) or in months.

Total distance : Total running distance of the plunger’s driver in m.
5. Press exit to return to the Tests menu.
Test Description
Run this test to check the maintenance messages entered. The maintenance message is
displayed for information only. It cannot be modified here.
1. Access the Tests menu. See section 6.2.1, page 40.
2. Press the arrow keys to select Test 3: Maintenance messages .
3. Press enter .
Informational messages stored by After Sales Service are displayed.
4. Press exit to return to the Tests menu.
Test Description
Run this test to consult the list of pump events, and the details of each recorded technical event.
The clinical events are not displayed here.
1. Access the Tests menu. See section 6.2.1, page 40.
2. Press the arrow keys to select Test 4: Events .
3. Press enter .
The technical events are listed.
4. Press the arrow keys to select an event.
5. Press enter .
The selected event is displayed in detail.
6. Press the arrow keys to scroll through the event detail screen.
7. Press exit to return to the list of events.