Fresenius Kabi Agilia SP, Technical Manual

Page: 41 / 306

41
6.2.2 Test 1: Identification
Test Description
This test checks that the Identification parameters of the pump are correct. The Identification
parameters are displayed for information only. They cannot be modified here.
1. Access the Tests menu. See section 6.2.1, page 40.
2. Press the arrow keys to select Test 1: Identification .
3. Press enter .
4. Press the arrow keys to scroll through the information screens
.
The following data is displayed:

Pump name

Pump version or revision with software generation date

Pump serial number

CPU board serial number

Power supply board serial number

Power supply board software version or software revision with the
generation date

Battery serial number

For each language available:
- Language name
- Language file version or revision
- Language file creation date

For each parameter zone:
- Parameter zone version or revision
- Parameter zone creation date
- Last manual modification date

Boot version or revision

Boot creation date

Embedded software version or software revision with the generation date
5. Press exit to return to the Tests menu.