Fresenius Kabi Agilia SP Technical Manual Download Page 229

Page: 229 / 306

8.15

View Flow Rate History

Symbol

Procedure

Viewing flow rate history

This function allows the user to check the current infusion’s history

information in order to verify the dose administered.

You can view flow rate history as follows:

Press

Press the arrow keys to select

Press

enter

The following information is displayed:

- An event marker (cursor)

- The event details (time and flow rate)

- The measured flow rate (solid line)

Press the

and

buttons to browse the events.

Press

to view information about the selected event.

Information



The history is not refreshed while the history screen is displayed.

To refresh the history data, exit and select the history again.



Flow rate history is not stored after powering off.

Summary of Contents for Agilia SP



















































































































































































































































































































Search results

Summary of Contents for Agilia SP

Reviews:

Brands by name

Popular brands

Fresenius Kabi Agilia SP, Technical Manual

Search results

Summary of Contents for Agilia SP

Reviews:

Brands by name

Popular brands