Fresenius Kabi Agilia SP Technical Manual Download Page 224

Page: 224 / 306

8.10

Day/Night Mode

You can change the patient’s weight or body surface area as follows:

Press

Press the arrow keys to select

Press

enter

Press

to change the patient’s weight or body surface area.

Press

to confirm the infusion settings.

Symbol

Procedure

Switching between day mode and night mode

This function switches between day mode

and night mode

The default night mode settings are as follows:



The key-press beep is silenced.



Infusion indicators and screen brightness are dimmed.

Depending on your pump configuration, the switch between day and

night mode may be managed either through this menu (manual mode),

or according to pre-defined settings (auto mode). For more information,

refer to the technical manual.

Switching from Day Mode to Night Mode

You can switch to night mode as follows:

Press

Press the arrow keys to select

Press

enter

Summary of Contents for Agilia SP



















































































































































































































































































































Search results

Summary of Contents for Agilia SP

Reviews:

Brands by name

Popular brands

Fresenius Kabi Agilia SP, Technical Manual

Search results

Summary of Contents for Agilia SP

Reviews:

Brands by name

Popular brands