Fresenius Kabi Agilia SP Technical Manual Download Page 206

Page: 206 / 306

7.10.2

End of Infusion

7.10.3

Powering off

When the infusion is complete, the following happens:



An audible alarm is triggered.



An alarm message appears on the pump screen.



The infusion indicator lights flash red.

End of infusion settings are configurable with Agilia Vigilant Drug’Lib

software (custom profiles), or in the pump options (Basic Profile). For

more information, refer to the technical manual.

Silencing the Alarm

Press

to silence the alarm.

Prepare a new syringe, and adjust the settings for a new infusion.

You can power off the pump as follows:

Press

to stop the infusion.

Press and hold

until the pump powers off.

Summary of Contents for Agilia SP



















































































































































































































































































































Search results

Summary of Contents for Agilia SP

Reviews:

Brands by name

Popular brands

Fresenius Kabi Agilia SP, Technical Manual

Search results

Summary of Contents for Agilia SP

Reviews:

Brands by name

Popular brands