Fresenius Kabi Agilia SP Technical Manual Download Page 170

Page: 170 / 306

Fundamentals

4.1

Profiles

4.1.1

Basic Profile

profile

defines the device configuration and drug library used for a

group of patients in a given health care environment.

By default, factory settings include only 1 profile (Basic Profile).

Custom profiles can be created and loaded to the pump with Agilia

Vigilant Drug’Lib software. Custom profiles feature a specific pump

configuration and a drug library.

A pump can manage up to 20 profiles:



1 Basic Profile



Up to 19 custom profiles

Information

For pumps used on only one group of patients, we recommend disabling

the ability to select the profile, thus locking the pumps to the selected

profile.

Basic Profile allows programming of an infusion whose settings have not

been pre-defined with Agilia Vigilant Drug’Lib software.

To program an infusion with Basic Profile, choose "Basic Profile" when

selecting a profile.

Basic Profile has the following characteristics:



All infusion settings are to be defined.



The Agilia Vigilant Drug’Lib software's safeguards are
unavailable:
- The infusion is programmed without drug names.
- Limits on drug infusion rates are not included.

Configurations and settings accessible in Basic Profile may not be

suitable for all patient groups and protocols.

Summary of Contents for Agilia SP



















































































































































































































































































































Search results

Summary of Contents for Agilia SP

Reviews:

Brands by name

Popular brands

Fresenius Kabi Agilia SP, Technical Manual

Search results

Summary of Contents for Agilia SP

Reviews:

Brands by name

Popular brands