ASSEMBLY INSTRUCTIONS
UNFOLDING THE SCOOTER:
FOLDING THE SCOOTER:
ADJUSTING THE HANDLE BARS:
1. Locate the release catch on the bars and pull to release lock from the fender brake.
2. Keeping the catch pulled up, lift the bars upright until they lock into place, release the catch.
3. Always make sure the locking mechanism is fully located before riding.
NOTE:
Listen for the click
4. Lift release catch fully, you will now be able to collapse the scooter.
5. Ensure that the catch has locked securely onto the fender brake.
6. This scooter has been designed for easy transportation while folded, pick up by the handle and pull it along!
7. To fold handle bars away, press metal nipples and pull grips apart, secure in the plastic clips below.
8. To raise or lower handle bar height, unfold the metal clamp on the upright bar to release its clasp.
9. Press the metal nipple on the upright to allow movement to the next preset height.
10. Once the appropaite height (the metal nipple must be showing through a hole) has been achieved,
the clamp must be closed to ensure there is no movement and the height is secured.
NOTE: Make sure the clamp is tightened fully to avoid excess bar movement.
WARNING!
Make sure the locking
mechanism clicks fully
in to place before riding.
(1.)
(2.)
(3.)
(4.)
(5.)
(6.)
(9.)
(10.)
(7.)
(8.)
