freightliner CL112 2015, Maintenance Manual

Page: 162 / 180

16. Using the yellow marks, center the bellows be-
tween the exhaust pipes. Verify that the pipe is
inserted at least 7/16 inch (10 mm) past the face
of the flange. See
Fig. 9 , Ref. A.
17. Install the slip clamps on the bellows. Tighten the
slip clamps 11 lbf·ft (15 N·m).
18. Start the engine and check for exhaust leaks.
Tighten any clamps as needed.
02/23/2011 f490458
A A
2 1 3
A. At least 7/16 inch (10 mm)
1.
Forward CGI Pipe
2. CGI Bellows
3. Aft CGI Pipe
Fig. 9, CGI Bellows Installation
02/08/2010 f490417
5
4
3
2
1
1. CGI Bellows
2. Slip Clamp
3. Retaining Ring
4. Graphite Gasket
5. Forward CGI Pipe
Fig. 10, Forward Facing Slip Clamp Installation
Exhaust
49
Columbia Maintenance Manual, September 2015
49/6