Freiberg
Instruments
GmbH
ּ Am St. Niclas Schacht 13 ּ 09599 Freiberg – Germany
51 / 78
4.1.6.
Access to internal sample loading/unloading unit
The loading/unloading unit is hidden under the big cap on the chamber.
figure 37:
location of the loading/unloading unit
Open the screws and move the cap up.
figure 38:
removing the loading/unloading unit
Give attention on the right position of the gasket if you close the cap.
4.1.7.
Heater exchange
The heater is mounted together with the sample arm and can be changed together with the
arm.
First the arm has to be moved to the maintenance position. Than the maintenance panel has
to be opened.
