FREEWAY S180E Mobile Hoist, User Manual

Page: 9 / 40

999367 – Revision B P a g e | 9 of 40
Assembly instructions
3.1 Unpacking
Some of the parts are heavy and will need to be lifted with care. Items weighing over 20kg will require a two person
lift. Please refer to (7.0) technical specifications for components weights.
The Hoist will arrive to you in a robust box, please be careful when removing the components from the box. Please
read the user guide in full before operating.
This user manual should be kept safe for future reference.
The Hoist has been specifically designed to be installed in both the professional and home healthcare environments.
No matter the environment, health and safety factors should be considered to ensure the safety and essential performance of
the Hoist and to avoid unnecessary damage or injuries to people within the area of the Mobile Hoist.
The environment in which the Mobile Hoist is situated in, whilst carrying out a transfer, is required to be on a flat surface with
no steep inclines.
3.2 Unboxing Hoist
When using a sharp knife, be careful not to damage the product.
This section will summarise the layout of the Hoist Packaging and what is included in the Box. It is recommended a knife is used
for smoother unpacking of the Hoist. The Hoist is packed into a single box (750x450x400) weighing approximately 45kg.
Using a knife to open the box around the perimeter, the box should open, and the internal packaging must be removed to access
the Hoist. It will include all the following components. It is recommended that the components are removed in the numerical
order below.
1. Mast
2. Base
3. Fixings
4. Hand Control
5. Charging Lead
6. User Manual