49
4.5. Integrated Peripherals
Selecting “Integrated Peripherals” on the main program screen displays
this menu:
On-Chip Primary/Secondary PCI IDE: These options enable or disable
the primary and secondary onboard IDE controllers. The default settings
are “Enabled.”
IDE Primary/Secondary Master/Slave PIO: When set to “Auto” the
BIOS will automatically set the mode to match the transfer rate of the hard
disk. If the system won’t boot up when set to “Auto” set it manually to a
lower mode, e.g., from Mode 3 to Mode 2. All IDE drives should work
with PIO mode 0. There are six options:
H
Auto (default)
H
Mode 0
H
Mode 1
H
Mode 2
H
Mode 3
H
Mode 4
Integrated Peripherals
BIOS Configuration
