3. Hardware Installation
This chapter explains how to use your mainboard to build a powerful
computer system. At a minimum, you will need the following components
in order to build a fully functioning system.
◆
Computer case with ATX power supply
◆
PGA370 Processor
◆
One SDRAM memory module
◆
One floppy disk drive
◆
One UDMA-66/100 IDE hard disk drive
◆
One CD-ROM drive
◆
One display monitor
◆
One PS/2 mouse
◆
One PS/2 keyboard
◆
One set of loudspeakers
Of course, you can use the system I/O ports and expansion slots to add
many more features and components to your system than the items listed
above.
3.1. Unpacking
The P6F135 mainboard package contains the following items:
❑
One mainboard
❑
One IDE 66/100 40-pin ribbon cable
❑
One floppy 34-pin ribbon cable
❑
Driver and utility CD
❑
One dual port USB bracket
❑
User’s manual
After removing the mainboard from its anti-static bag, place it on a
grounded or antistatic surface (component side up). Inspect the mainboard
and contact your vendor immediately if it is damaged.
