USB-KW019032 Freescale USB Dongle Development Board , User’s Guide, Rev. 0, 10/2015
Freescale Semiconductor, Inc.
3
Safety information
2.2
Regulatory approval for Canada (IC RSS 210)
This equipment complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
1. This board must not cause interference
2. This board must accept any interference, including interference that can cause undesired operation
of the device
2.2.1
26 PART 5 – Appendix
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes:
1. l'appareil ne doit pas produire de brouillage, et
2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
2.3
Electrostatic discharge considerations
Although damage from electrostatic discharge (ESD) is much less common on these devices than on the
early CMOS circuits, normal handling precautions must be used to avoid exposure to static discharge.
Qualification tests are performed to ensure that these devices can withstand exposure to reasonable levels
of static without suffering any permanent damage.
All ESD testing is in conformity with the JESD22 Stress Test Qualification for Commercial Grade
Integrated Circuits. During the device qualification, ESD stresses were performed for the Human Body
Model (HBM), the Machine Model (MM), and the Charge Device Model (CDM).
The latch-up testing is in conformity with the JESD78 IC latch-up test.
When operating or handling the development boards or components, Freescale strongly recommends
using at least the grounding wrist straps, plus any (or all) of the following ESD dissipation methods:
•
Flexible fabric, solid fixed size, or disposable ESD wrist straps
•
Static control workstations, static control monitors, and table (or floor) static control systems
•
Static control packaging and transportation materials, and environmental systems
2.4
Disposal instructions
This product can be subject to special disposal requirements. For product disposal instructions, see
www.freescale.com/productdisposal
.
