Freescale Semiconductor MPC5565, Reference Manual

Page: 86 / 1153

Signal Description
MPC5565 Microcontroller Reference Manual, Rev. 1.0
Freescale Semiconductor 2-29
2.3.7.18 DSPI B Chip Select / DSPI C Chip Select / GPIO
PCSB[5]_PCSC[0]_GPIO[110]
PCSB[5]_PCSC[0]_GPIO[110]
—
PCSB[5] is the primary function and is a peripheral chip select output
pin for the DSPI B module. PCSC[0] is the alternate function and is a DSPI C peripheral chip select output
but also is a Slave Select (SS) input pin for DSPI C module slave mode operation.
2.3.8 Enhanced Queued A/D Controller (eQADC) Signals
2.3.8.1 Analog Input / Differential Analog Input
AN[0]_DAN0+
AN[0] is a single-ended analog input to the two on-chip ADCs. DAN0+ is the positive terminal of the
differential analog input DAN0 (DAN0+ to DAN0–).
2.3.8.2 Analog Input / Differential Analog Input
AN[1]_DAN0–
AN[1] is a single-ended analog input to the two on-chip ADCs. DAN0– is the negative terminal of the
differential analog input DAN0 (DAN0+ to DAN0–).
2.3.8.3 Analog Input / Differential Analog Input
AN[2]_DAN1+
AN[2] is a single-ended analog input to the two on-chip ADCs. DAN1+ is the positive terminal of the
differential analog input DAN1 (DAN1+ to DAN1–).
2.3.8.4 Analog Input / Differential Analog Input
AN[3]_DAN1–
AN[3] is a single-ended analog input to the two on-chip ADCs. DAN1– is the negative terminal of the
differential analog input DAN1 (DAN1+ to DAN1–).
2.3.8.5 Analog Input / Differential Analog Input
AN[4]_DAN2+
AN[4] is a single-ended analog input to the two on-chip ADCs. DAN2+ is the positive terminal of the
differential analog input DAN2 (DAN2+ to DAN2–).
2.3.8.6 Analog Input / Differential Analog Input
AN[5]_DAN2–
AN[5] is a single-ended analog input to the two on-chip ADCs. DAN2– is the negative terminal of the
differential analog input DAN2 (DAN2+ to DAN2–).