Quick Start Guide
4
1
Verify the Jumper
Configuration
Verify the jumper configuration on
each board according to the Jumper
Configurations table found later in this
guide.
2
Assemble the
Tower System
Assemble the Tower System by matching
primary and secondary sides on the
serial and MCU boards to corresponding
elevators.
Step-by-Step Installation Instructions
In this quick start guide, you will learn how to set up the MED-SPI and Tower System
and run the included demonstrated software. For more detailed infomation, review the
user manual at
freescale.com/healthcare
.
3
Connect the
MED-SPI AFE
Connect the MED-SPI AFE to the medical
connector on TWR-K53N512. Board
must be placed as shown below.
Note:
MED-SPI board must be plugged to the
medical connector before the Tower System gets
powered
4
Download and
Install Software
Download and install IAR Embedded
Workbench 6 for ARM
®
. A 30-day
trial version can be downloaded from
iar.com
.
