2.4
Mini ITX Lite Baseboard Connection Diagram
Figure 2.2 – Connection Diagram for the ITX Baseboard
Connection Diagram Details:
1. CAN Port
2. Serial Port
3. Ethernet Ports
•
Ethernet Port 1 (top in this image)
•
Ethernet Port 0 (bottom in this image)
4. ATX Power Connector
5. 5V Power In -- use appropriate power adaptor
6. System Reset Button
7. PCI Connector
8. Power On LED
Important Note:
The ITX baseboard is a common assembly board for all ColdFire LITE Development Kits and may
contain peripheral connectors that are not supported by the Fire Engine purchased.
Zoom ColdFire QuickStart Guide
4
