i.MX 6UltraLite EVK Board Hardware User’s Guide, Rev. 1, 03/2016
Freescale Semiconductor, Inc.
15
Specifications
2.15
ARDUINO expansion port (J1703-J1706)
J1703-J1706 (unpopulated) is defined as the ARDUINO Interface. If the developer wants to use the
processor for ARDUINO development, the following rework should be implemented.
•
Populate- R1717-R1732
The pin definitions of ARDUINO interface are shown in following table.
2.16
Camera module connector (J1801)
One parallel CSI (Camera Sensor Interface) (up to 24 bit and up to 133 MHz) is supported by the i.MX
6UltraLite processor. It is designed to support 24-bit RGB888/YUV444, CCIR656, 8-bit YCbCr, YUV or
RGB, and 8-bit/10-bit/26-bit Bayer data input.
The CMOS module is OV5640-MRFL-AB0T, which is based on OmniVision chipset OV5640. The
developer can choose another CMOS module on their project, if the pin map is compatible. The connector
used in i.MX 6UltraLite EVK is FX12B-40P-0.4SV, from HIROSE.
Table 6. ARDUINO pin definitions
J1703
J1706
UART_RX/D0
A0
UART_TX/D1
A1
D2
A2
D3
A3
D4
A4
D5
A5
D6
D7
J1704
J1704
D8
NC
D9
3.3V
D10/SPI_CS
RESET
D11/SPI_MOSI
3.3V
D12/SPI_MISO
5V
D13/SPI_CLK
GND
GND
GND
3.3V
3.3V
D14/I2C_SDA
D15/I2C_SCL
