Table 33-1. FlexCAN Driver Files
File
Description
33.1.4 Linux Menu Configuration Options
The following Linux kernel configuration options are provided for this module. To get to
these options, use the ./ltib -c command when located in the <ltib dir>. On the screen
displayed, select Configure the Kernel and exit. When the next screen appears, select
the following options to enable this module:
• CONFIG_CAN - Build support for PF_CAN protocol family. In menuconfig, this
option is available under
Networking > CAN bus subsystem support.
• CONFIG_CAN_RAW - Build support for Raw CAN protocol. In menuconfig, this
option is available under
Networking > CAN bus subsystem support > Raw CAN Protocol (raw access with
CAN-ID filtering).
• CONFIG_CAN_BCM - Build support for Broadcast Manager CAN protocol. In
menuconfig, this option is available under
Networking > CAN bus subsystem support > Broadcast Manager CAN Protocol
(with content filtering).
• CONFIG_CAN_VCAN - Build support for Virtual Local CAN interface (also in
Ethernet interface). In menuconfig, this option is available under
Networking > CAN bus subsystem support > CAN Device Driver > Virtual Local
CAN Interface (vcan).
• CONFIG_CAN_DEBUG_DEVICES - Build support to produce debug messages to
the system log to the driver. In menuconfig, this option is available under
Networking > CAN bus subsystem support > CAN Device Driver > CAN devices
debugging messages.
• CONFIG_CAN_FLEXCAN - Build support for FlexCAN device driver. In
menuconfig, this option is available under
Networking > CAN bus subsystem support > CAN Device Driver > Freescale
FlexCAN.
Driver Overview
i.MX 6Solo/6DualLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013
240
Freescale Semiconductor, Inc.
