manualshive.com logo in svg

Freescale Semiconductor i.MX 6DualLite, Reference Manual

Share
Download
Freescale Semiconductor i.MX 6DualLite Reference Manual Download Page 161

The following options can be selected:

• CPU Frequency scaling
• CPU frequency translation statistics
• Default CPU frequency governor (interactive)
• Performance governor
• Powersave governor
• Userspace governor for userspace frequency scaling
• Interactive CPU frequency policy governor
• Conservative CPU frequency governor
• CPU frequency driver for i.MX CPUs

20.2.1 Board Configuration Options

There are no board configuration options for the CPUFREQ device driver.

Chapter 20 CPU Frequency Scaling (CPUFREQ) Driver

i.MX 6Solo/6DualLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

Freescale Semiconductor, Inc.

161

Summary of Contents for i.MX 6DualLite










































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands