Freescale Semiconductor
6
4.2.1 Configuring the Application Module for use with the Project Board
1)
Move the PWR_SEL jumper FROM “VB” TO “VX_EN”
2)
Remove all COM_EN jumpers from the Application Module as shown by Figure 2.
3)
Remove all BDM_EN jumpers from the Application Module as shown by Figure 2.
Figure 2 Application Module: with Project Board Operation Jumper Settings
Jumper Position
Jumper ID
Description
VR1
VB
VX_EN
PWR_SEL
Source power input from connector J1
SW1
SW2
SW3_1
SW3_2
SW3_3
SW3_4
USER
Jumpers enable access to application modules features. For
push button switch (SW1:2), 4-position DIP switch 3
(SW3_1:4), LED[1:4], and to simplify circuit connections and
emphasize software development.
