Freescale Semiconductor
SLKS12QSG
Quick
Reference
Guide
Rev. 0, 2/2008
Freescale Semiconductor
3
2 Unpack
Open the shipping carton and remove the contents. Locate the packaging list and verify items have been
received from the packaging list.
Inspect both the project board and the application module for damage that may have occurred during
shipping. If damage is found, contact www.freescale.com/support for assistance.
3 Software Setup
The following software installation is a one-time, required procedure per host PC that you intend to use
with the project board and/or application module. After completing the software setup on your host PC,
you can skip the software section on subsequent uses of your project board and/or application module
and begin the hardware setup or development sections.
To install and register CodeWarrior development tools for HCS12(X) Microcontrollers onto a host PC,
complete the instructions found inside the CodeWarrior Development Studio for Freescale HCS12(X)
Microcontrollers case.
Additional tools and training materials for CodeWarrior are available at
NOTE
Academic Edition development tools are full-featured and not for commercial development. They may
only be licensed to students, faculty, and staff of accredited institutions.
Periodically check http://www.freescale.com/codewarrior for updates and patches to your development
tools. For questions on CodeWarrior development tools, visit http://www.freescale.com/support
4 Hardware Setup
For more information on the Application Module operation, jumper descriptions and settings please
refer to the development board User Guide or visit www.freescale.com\universityprograms for latest
information.
