background image

 

Electrical Characteristics / Performance

1. Solar Panel (mono/multi crystalline): 5.5V 120mA
2. Rechargeable Lithium Battery: 3.7V 1000mAh
3. USB charging cable: 5V 500mA
4. DC Output: 5.5V+/– 0.5% 500mA
5. Time required to deliver power from Freeloader: 

30 minutes to 1 hour

6. Time required to charge the FreeLoader internal 

battery using the USB charge cable: 3 to 4 hours

7. Time required to charge the FreeLoader internal 

battery in sunny conditions using the solar panels: 

5 to 10 hours

Note

 - light quality plays a key role in determining the speed 

of charge. Cloudy days or the Freeloader being positioned 

behind a glass window will all increase the time needed to 

charge its battery. 

Components Included:

1 x FreeLoader charger; 1 x USB charge cable
1 x Power Master cable; 1 x Adaptor for Nintendo DS Lite
1 x Adaptor for Motorola mobile phone
1 x Adaptor for LG Chocolate Series Phones
2 x Adaptors for Nokia mobile phones
2 x Adaptors for Samsung mobile phones
2 x Adaptors for Sony Ericsson mobile phones
1 x 4mm jack plug for PSP, Tom Tom, digital camera etc
1 x USB 2.0 Female socket cable for iPod, PDA’s etc
1 x Mini USB adaptor for Motorola RAZR, Blackberry etc

P O R TA B L E   S O L A R   E N E R G Y

User Manual

Portable Solar Energy

Models: 

SC8088 (Grey)

SC8089 (Pink)

Freeloader's aluminium skin and solar panels are 

protected during transit by a transparent fi lm. 

Remove the fi lm before fi rst use!

Operation Instructions:

1. To charge using the USB charge cable

Insert the USB plug into a desk top PC, lap top or other 

suitable device which is switched ON. Insert the other 

end of the cable (mini USB) into FreeLoader’s body. 

The central LED (B) will turn red. Once fully charged 

the LED will turn green and the USB charging cable 

should be removed.

Note

 - do not leave the USB charge cable plugged in 

overnight as damage to the battery may occur.
Do not charge using USB whilst delivering power to 

a devise at the same time.

Important - This method of charging is 

recommended for the fi rst charge from new 

and may take up to 8 hours

2. To charge from the solar panels

Remove the clear fi lm from both solar panels before 

fi rst use. Detach the solar panels from the body of 

FreeLoader and separate the two halves exposing the 

face of each solar panel. The end of the solar panel 

that has the two locating lugs should then be inserted 

into the side of FreeLoader’s body – one solar panel 

each side.
When the solar panels are facing the sun, the two 

LED’s (A and C) will turn red. The brighter the light, 

the faster the charge.

Note

 - be careful not to scratch the surface of the 

solar panels and do not clean with strong detergent.

.2.

.1.

.3.

.4.

3. To charge hand held electrical devices

Insert the male end of the Master cable into the female 

socket on FreeLoader’s body. Select the correct adaptor tip, 

insert into the female end of the Master cable and connect 

to your device. The central LED (B) will turn RED. Once 
FreeLoader’s battery is empty the LED will switch OFF.

Warning

1. Keep FreeLoader’s body away from fi re, water and any form 

of moisture to ensure damage and injury do not result.

2. Any sever shock or impact may result in damage and will 

invalidate the warranty.

3. It is forbidden to dismantle FreeLoader except by Solar 

Technology personnel or agents appointed by Solar 

Technology. Any sign of tampering will result in the 

warranty being invalidated.

KEY TO LED DISPLAYS

LIGHT A LIGHT B

LIGHT C EXPLANATION  

RED

OFF

RED

Charging form solar panels

OFF

RED

OFF

Charging from  USB or sending charge to mobile divice

OFF

GREEN

OFF

Fullly charged from USB 

Please note:

 There is no indication to confi rm that Freeloader is fully 

charged when using the solar cells to charge, but prolonged exposure 

of Freeloader to sun/daylight will not damage the battery because of its 

in-built advanced charge control electronics. 

 We recommend that you charge your

 FreeLoader via USB for its fi rst charge

1.

  Solar Panel

2.

  Power in (for USB charge cable)

3.

  Power out (for master cable)

4.

  LED Indicator

 

A.

 Solar charging indication LED 

 

B.

  USB charging and discharging LED 

 

C.

 Solar charging indication LED 

Reviews: