XPLORER ADS-B Receiver
Installation Manual
87214, Revision A
December 3, 2012
III-7
<baud> 4800, 9600, 19200, 38400, 57600, 115200, 230400,
Note that only serial port 1 accepts serial port input configuration settings.
For example, to set serial port 1 to FFS GPS input at 19200 BAUD, enter “
set serial in 1
GPS-FFS 19200
”. Below is an example of the output displayed after entering this
command:
Serial In 1............... GPS-FFS, 19200
3.4.1.8.4
“set serial out” Command
This command sets the Serial Port Output configuration options. Help on this command
is displayed by entering “
set serial out ?
”. Example “
set serial out ?
” output is
displayed below:
USAGE: set serial out <port> <func> <baud>
<port> Serial port number: 1, 2,
<func> Interface function/protocol:
Port 1:
Port 2:
UNUSED, Traffic-Alert, Pass-Thru,
<baud> 4800, 9600, 19200, 38400, 57600, 115200, 230400,
Note that only serial port 2 accepts serial port output configuration settings.
For example, to set serial port 2 to Pass Thru output at 115200 BAUD, enter “
set serial
out 2 Pass-Thru 115200
”. Below is an example of the output displayed after entering
this command:
Serial Out 2.............. Pass Thru, 115200