Freedom R8100 SERIES, Operator'S Manual

Page: 52 / 255

52
Figure 3.2.4.3-3 A/B Sequence table submenu for user programmable entries
5/6 Tone (displayed when synthesizer Format selected is 5/6 Tone)
Activates a data entry window and horizontal menu to enter tones for the 5/6 Tone paging format – See
Figure 3.2.4.3-4. Tone entries are made using the cursor control, numeric keypad, and spin knob. See
Table B-4 in Appendix B for a selection table with a listing of valid 5/6 Tone tones.
The first digit preceding the hyphen is the preamble tone for activating one of ten battery-saver groups.
The R-Repeat key or “R” tone is used in place of a repeated digit – when this tone is heard it is assumed
the prior digit is being transmitted again. If the digit is repeated a third time the original tone is transmitted.
A sixth or “X” tone is optional for pagers that support this function. The “X” tone indicates a different
beep pattern is used in place of that used for the standard 5 tone response. Pressing the 6-Tone soft key
adds the “X” tone to the transmission.