Freedom R8100 SERIES, Operator'S Manual

Page: 211 / 255

211
2.2.7.11.2 Keywords
In addition to M&C commands, the following keywords are available for scripting and automated
execution of procedures.
1. DELAY - wait for a specified number of seconds. Whereas a line delay can be set from the
graphical user interface, doing so affects all lines which could make the script laboriously slow if
a large delay is needed after just one.
2. PAUSE - generate custom user prompts. The text appearing after the keyword is displayed on the
unit screen and execution waits until the user responds with a soft key press. For example, see
Figure 2.2.7.11-5.
2.2.8 Settings Menu
R8100 configuration settings and system information are accessed by pressing the Settings navigation
button – see Figure 3.2.9-1. The submenu presents a user initiated self calibration function and various
configuration settings that affect R8100 operation. It also presents information on the unit’s firmware,
installed options and diagnostic messages generated during operation.
Figure 3.2.9-1 Submenu after pressing Settings navigation button on R8100 front panel