FRANCO DINING CHAIR
23745407
Page 1 of 4
www.freedom.com.au
www.freedomfurniture.co.nz
Thank you for purchasing the Franco dining chair. Before you begin to assemble your new piece
of furniture, please check to ensure that all hardware and parts have been supplied. This page
lists all contents included in the carton(s).
Follow instructions closely as deviation from them may present a possible safety risk and may
void your warranty.
It is recommended that assembly is done on a soft surface such as carpet to avoid any damage.
If you experience any problems with your new purchase please phone Freedom Customer
Service (FCS) 1300 135 588 (Australia) or 0800 469 327 (New Zealand)
Hardware (supplied)
Parts
Care Information
Timber
Periodically check and re-tighten any fasteners. Dust weekly using a soft,clean cloth.Do not
use harsh abrasives,chemicals or polishes containing silicone.Avoid direct sunlight as this will
cause the timber to change colour.It is important to remove moist substances immediately.
Fabric.
Periodically check and re-tighten any fasteners. Avoid direct sunlight. Treat spills and stains
as soon as they occur. Gently scrape any soil or mop any liquid from the surface of the fabric,
apply proprierary cleaning agents strictly according to instruction to remoce the residue of
the spill. Do not saturate the fabric or interior with water or other cleaning liquids. May be spot
cleaned with dry cleaning solvent. Pilling can occur occasionally as a result of normal daily wear
and should not be considered as a fault. Fibre pills can be removed by a battery operated pilling
tool available from most haberdashery stores.
M6×20mm
A (x12)
1
M6×20mm
B (x12)
M6×20mm
C (x12)
M6×20mm
D (x12)
2
3
4
