5
Setting Up the Unit
Before Initial Use
The battery must be fully charged prior to the initial use. Connect the supplied
power adapter to the DC input jack to charge the battery (refer to
⑪
on pages
2 and 3). While charging, a red light is illuminated. When fully charged, the light
is green.
Remove the LCD protection film before using the unit. Be careful not to allow
foreign material to adhere to the camera lens. If any foreign material is on the
lens, wipe it off with the provided microfiber cloth.
Opening the TOPAZ Ultra
1.
Place the folded TOPAZ Ultra on a stable surface such as a table.
2.
Press on the base plate with one hand, while the other hand lifts the top of
the body frame.
3.
Lift the arm until it locks in place.
1. 2. 3.
4. 5. 6.
