background image

AS-1R/AMBI SPACE

DIGITAL REVERB

Owner’s Manual

Ver 1.2

Safety Precautions

Precautions are identified by the two types of symbols below:

Warning

Caution

Be sure to read these precautions and the user's manual before using this product.

Warning

Never try to disassemble, or modify the unit.
Stop using the unit if you notice smoke or a strange odor 
coming from it and unplug the AC adapter from the outlet.

Never try to repair the unit or replace parts unless so 
instructed by the user's manual. For other repair or parts 
replacement contact your local dealer or Free The Tone.

Never unplug the AC adapter while your hands are wet.
Do not apply too much pressure or tension or place a heavy 
object on the power cord. Doing so may damage the power 
cord and create a danger of fire or electrical shock.

Turn off the unit and unplug the AC adapter from the outlet 
and contact your local dealer or Free The Tone for repair in 
the case of any of the following:

• The power cord is damaged.

• Foreign objects (coins, pins, etc.) or liquid enter the unit.

• The unit gets wet from rain or other liquid.

• The unit is out of order.

Be careful of heat radiation from the unit.

Never cover the AC adapter with cloth or other objects.
Built-up heat can deform the case or cause a fire hazard.

This symbol indicates that a risk of serious personal

injury or material damage may result if precautions are

ignored.

This symbol indicates that a risk of death or serious

personal injury may result if precautions are ignored.

Do not use or store the unit in environments where it will 
be exposed to:

• Extreme temperatures (direct rays of the sun, heat 

     

sources such as radiators or stoves.)

• High humidity or moisture.

• Excessive dust or sand.

• Excessive vibration or shock.

Whenever leaving the unit unattended for long periods,
be sure to unplug the AC adapter from the power source to 
avoid creating a fire hazard.

Take care not to drop the unit, and do not subject it to
excessive pressure or weight.

Do not press the switches on the unit with a bare foot,
or unexpected injury may result.

Do not use solvents (such as benzine, paint thinner) on
the unit, since these may dull the finish or damage the
surface.

Caution

Support / Service

Contact the following for support and/or repair service.
e-mail address: 

[email protected]

Summary of Contents for AMBI SPACE









Reviews: