DFA400 Rev0708
28
WIRING
The following figures include wiring and cable information.
Display Module
A remote display module requires four (4) wires, power (pins 1 and 2) and the
datalink connection (pins 7 and 8) to the primary display. A remote display must be
programmed with the same ID number as the primary display.
Figure 6. Display Module Wiring
8-Pin Connector/Cable
Pin Description
1
Power
2
Ground
3
Flow 5 VDC
4
Flow Sensor Ground
5
Flow Sensor Signal
6
NC
7
Proprietary Datalink (–)
8
Proprietary Datalink (+)
Rear View
Pin 1
