DFA400 Rev0708
20
CODE
FEATURE
OPTION
311
Flow Rate Increment Set Point 0000 to 9999
312
ID Number
0 to 99
313
Module Function
Pri, SLA
315
High Flow Warning
0001 to 9999
0 = Disabled
316
Low Flow Warning
0001 to 9999
0 = Disabled
317
Totalizer Reset
Yes = Resets to 0 at Power On
No = Stores Total Flow at Power Off
318
Flow Cutoff (Frequency)
0 to 99.9 Hz
319
Flow Cutoff (Flow Rate)
0 to 999
321
Flow Calibration (Single Point) 1 Calibration Point
322
Flow Calibration (Multiple Point) 9 Calibration Points
340
CAN Terminator
On, Off
E202
Invalid Program Code Entered Re-Enter Code
E204
No Flow Sensor Signal
Check Water Flow and Wiring
E206
Invalid Calibration Point
Select Different Calibration Point
E208
Memory Failure
Contact Factory
E210
Exceeded Maximum Calibration
Points
Exit Calibration Procedure
Table 1. Program Code Quick Reference
Notes:
- Refer to Program Code Descriptions for detailed information.
- The time-out feature returns the program to normal operation in five
seconds if input is not detected.
- When a valid code has been entered and a programed value or option is
shown in the display, the time-out feature is disabled.
