12
Resetting BOOKMAN
If the BOOKMAN keyboard fails to re-
spond, or if its screen performs errati-
cally, first press
CLEAR
and then press
ON/OFF
twice. If nothing happens, follow
the steps below to reset it.
Warning:
Pressing the reset button
with more than very light pressure may
permanently disable your BOOKMAN.
In addition, resetting BOOKMAN erases
settings and information entered into its
built-in book, and in an installed book card.
1. Hold
CLEAR
and press
ON/OFF
.
If nothing happens, try Step 2.
2. Use a paperclip to
gently
press
BOOKMAN’s reset button.
The reset button is recessed in a pin-
sized hole on the back of BOOK-
MAN. Look for it on the battery
cover or near the book card slot.
➤
Troubleshooting
• Make sure your book card is
installed correctly.
• Check that the book card’s
metal contacts are dirt-and dust-
free.
Optional Features
AC adaptor jack:
Some BOOK-
MAN models are equipped with a stan-
dard 3.5 mm jack for use with a 9-volt,
200-300 milliamp AC/DC adaptor.
This symbol indicates that the inner
core of the plug of an AC adaptor is
negative and that the outer part of the
plug is positive. If your AC/DC adap-
tor does not have this symbol, con-
firm its compatibility at its place of pur-
chase.
Headphone jack:
Some BOOK-
MAN models also have a 3.5 mm ste-
reo headphone jack for use with a stan-
dard impedance 8 Ohm headset.
Headphone
jack
AC adaptor
jack
