Franklin Fueling Systems EVO 200, Installation Manual

Page: 5 / 16

1
Introduction
This manual contains instructions for replacing the LCD display on the Franklin Fueling Systems
(FFS) EVO
TM
200 and EVO
TM
400 Automatic Tank Gauges (ATGs). You must follow all safety
information, warnings, instructions, and other information in this manual. Please read this entire
manual carefully. If you do not follow the instructions in this manual, the result could be faulty
operation, equipment damage, injury, or death.
Questions and concerns
In case of emergency, follow the procedures established by your facility. If you have questions or
concerns about safety or need assistance, use the information below to contact FFS:
franklinfueling.com
3760 Marsh Rd. • Madison, WI 53718, USA
Tel: +1 608 838 8786 • Fax: +1 608 838 6433
Tel: USA & 1 800 225 9787 • Tel: UK +44 (0) 1473 243300
Tel: Mex 001 800 738 7610 • Tel: DE +49 6571 105 308 • Tel: CN +86 10 8565 4566
Conventions used in this manual
This manual includes safety precautions and other important information presented in the
following format:
NOTE
: This provides helpful supplementary information.
IMPORTANT : This provides instructions to avoid damaging hardware or a potential hazard to the
environment, for example: fuel leakage from equipment that could harm the environment.
CAUTION : This indicates a potentially hazardous situation that could result in minor or
moderate injury if not avoided. This may also be used to alert against unsafe practices.
WARNING : This indicates a potentially hazardous situation that could result in severe injury or
death if not avoided.
DANGER : This indicates an imminently hazardous situation that will result in death if not
avoided.