Franklin Fueling Systems EF1-230V, Operation Manual

Page: 6 / 12

2
TECHNICAL SPECIFICATIONS
• Stock code: EF1-230V
• Supply voltage: 230 V +/- 15% (194 V to 264 V)
• Supply frequency: 50/60 Hz (40 Hz to 70 Hz)
• Supply power: 2.8 kW / 3.5 kVA
• Supply protection: Class 1 earthed (grounded)
• Environmental protection: IP65
• Operating temperature: -15 ºC (5 ºF) to +45 ºC (113 ºF)
• Shipping dimensions: 460 mm (18") wide x 210 mm (8.3") deep x 210 mm (8.3”) high
• Shipping weight: 3.6 kg (8 lb)
POWER SUPPLY
Welder must be powered with:
• A quality 230 VAC, 50 Hz power supply with maximum tolerance of ± 15%.
• A quality generator capable of supplying a minimum of 2.8 kW (3.5 kVA). Note that an earth-
spike (grounding rod) must be used with generators.
• If used with a 110v to 230v step-up transformer follow these specifications:
• Safety Isolating transformer: 3.3 kVA minimum.
• Auto transformer: 3.3 kVa minimum.
EXTENSION CORDS / CABLES
Extension cables must comply with or be equivalent to H07RN-F specifications. Cable use must
comply with the following table:
WIRE SIZE AWG WIRE SIZE MAXIMUM LENGTH
1.5 mm 15 82 ft (25 m)
2.5 mm 13 164 ft (50 m)
4.0 mm 11 246 ft (75 m)
NOTE : All cable must be unwound from reel to prevent inductive heating effects.
NOTE
: EF1 welding cables use special 7- pin connectors.
PARTS
Bridging cables (x2)
EF
1
Electrofusion Welder
7pin Secondary
welding cable
Power cable
7 Pin Fusion chamber welding cable