5. Re-install the shell. Align the holes in the shell with the countersunk holes in the
OPV body.
6. Use the metal punch to carefully dimple (or press or form) the OPV shell into the
countersunk holes in the OPV body. This allows you to countersink the screws when
you install them.
OPV shell dimpled
(or pressed or
formed) into a
countersunk hole
in the OPV body
Metal
punch
7. Apply red Loctite
®
262 to the screw threads, and tighten them into the holes.
8. Use the grinder or file to grind off any part of the fastener head above the outside
diameter of the shell.
9. If the float link is missing or broken, use the link provided in the kit, and install the
1/4" pin (larger end) toward the float and the 1/8" pin (smaller end) toward the coupler
arm.
10. Use the remote tool to verify the functionality of the OPV.
11. Reinstall the OPV into the drop tube assembly, and then reinstall both into the fill
point.
12. Use the remote tool to verify the functionality of the OPV.
708548001 r1
