FRANKE
ANCONA SINGLE BOWL
UNDERMOUNT SINK - ANX 110-48
CLEANING RECOMMENDATIONS
We recommend the use of soapy water or approved cleaners.
This product should not be cleaned with abrasive materials.
Damage caused by any improper treatment is not covered by the product
warranty - refer to Warranty Conditions on the last page.
To see the complete FRANKE range go to
www.reece.com.au/bathrooms
SPECIFICATIONS
Recommended use
Domestic
Material
Stainless steel
Formation
Pressed 1 piece
Tap Holes
N/A
Dimensions
510 x 430 mm
Bowl Size
480 x 400 x 190 mm/35 L
Cut Out
Template
Cabinet Size
600 mm
Waste Outlet
90 mm
Features
Hidden overflow, sound deadening pads
Accessories
Optional accessories: Franke extension drainer,
rollamat, drainer basket and strainer bowl
Models available
ANX 110-34
Disclaimer:
Products in this specification manual must by regulation be installed by licensed and registered
trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from
their range without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs
listed are correct at time of publication however the manufacturer/distributor takes no responsibility for
printing errors.
Tech Page Version 1
FEATURES
Model
ANX 110-48
Bowl configuration
Single bowl
Bowl(s)
Stainless steel with cr=36 mm corners,
rear waste and overflow
Finish
Stainless steel
Fixing
Fixing clips
Colours
N/A
510
480
430
400
page 1 of 3
